TT 160/TT 460



    Radio and infrared

    Tool touch probe

    TT 160

    TT 460

    Probe accuracy

    ±15 µm

    Probe repeatability

    Repeated probing from one direction

    2 σ 1 µm at a probing velocity of 1 m/min

    Typical values:

    2 σ 1 µm at a probing velocity of 3 m/min

    2 σ 4 µm at a probing velocity of 5 m/min

    Deflection of probe contact

    5 mm in all directions

    Deflection force

    Axial: approx. 8 N

    Radial: approx. 1 N

    Probing velocity

    5 m/min

    Protection EN 60 529


    Operating temperature

    10 °C to 40 °C

    Storage temperature

    –20 °C to 70 °C


    Approx. 0.3 kg

    Approx. 0.4 kg

    Mounting on the machine table

    • Fastening by fixing clamps (included in delivery)
    • Fastening with mounting base (accessory)

    Electrical connection

    M12 flange socket, 8-pin

    Cable length

    25 m

    Voltage supply

    10 V to 30 V DC / 100 mA (with no load)

    2 batteries (rechargeable or non-rechargeable)
    1/2 AA or size LR2, each 1 V to 4 V

    Operating time

    Continuous duty: typically 400 h1) with lithium batteries

    Output signals

    • Trigger signals S and S (square-wave signal and its inverted signal)
    • Floating trigger output

    HTL signal levels

    UH 20 V with –IH 20 mA

    UL 2.8 V with IL 20 mA

    at 24 V DC rated voltage

    Signal transmission


    Radio or infrared transmission (selectable)
    with 360° range to SE

    Transceiver unit

    • SE 6602) for radio and infrared transmission
    • SE 6422) for infrared transmission

    TT switch-on/off

    Radio or infrared signal (selectable) from SE

    1) Reduced operating time if there is much surrounding radio traffic, or short but frequent probing intervals

    2) SE shared by TS 460 and TT 460, see page 28