TS 150 and TS 750

Workpiece touch probe for grinding machines and lathes

  • High probing accuracy of down to ±1 µm (with the T434 standard stylus)
  • High probing repeatability for very high measurement quality: down to 2 σ ≤ 0.25 µm
  • Signal transmission via cable
  • Interface: HTL
  • Probing speed: 5 m/min (with the TS 750 touch probe: 1 m/min)
  • Protection rating: IP68

Homogeneous probing accuracy

The TS 750 operates with high-precision pressure sensors, with force analysis for generating the trigger pulse. The forces that arise during probing are processed electronically. This method delivers extremely homogeneous, 360° probing accuracy.

Very low probing forces

Due to the low probing forces of approx. 1.5 N (axial) and 0.2 N (radial), the TS 750 can attain high probing accuracy and repeatability with almost no effect on the measured object. Only on further deflection do the deflection forces of the springs take effect until the machine stops.

High performance

Reduce idle times: the very first probing point can be used for measurements, thus eliminating the need for repeated probing. This high probing repeatability, even at high probing speeds, also reduces idle times. Integrated blowers clear the workpiece of chips.

Long-lasting accuracy

Even after five million probing cycles, the HEIDENHAIN workpiece touch probes are still highly accurate: with a probing repeatability of down to 2 σ ≤ 0.25 µm at a probing speed of up to 1 m/min, these touch probes deliver reliable measurements even after prolonged use.

Contact person – Sales

International Sales

+49 8669 31-3142

internationalsales@heidenhain.de
Find your nearest representative

TS 750: inspect surfaces while grinding

Product variants

Find the right product for you: for further advice, please contact our Sales department by phone or e-mail, or through our online form.
If you're looking for other solutions for your industry, this overview will help.